After a few years, concrete floors and stairs start showing signs of wear and cracks even though they are very durable and easy to maintain. Concrete stairs become corroded as well as damaged after regular use, leading to chipped stairs and cracks on the treads. It is most likely that the corners and edges of a concrete staircase will wear out. A well-maintained staircase is essential for preventing accidents and mishaps. It is important to fix crumbling or damaged areas of the concrete stair before the problem becomes more serious. The purpose of this article is to talk about concrete stair repairs and hope you will find all the useful information about this problem.
Cracked Stairs Solution
Before repairing concrete stairs, you need to determine the degree of repair required. According to concrete repairs Fredericton you must inspect it carefully before starting a repair. To do this, take a look at the stairs and see if the stairs are collapsing, cracking, or breaking into pieces. Cracks in concrete are caused stresses caused the displacement of the soil below. For stairs with cracked concrete, their repair is quite simple and can be done in about an hour. You need a good epoxy crack sealer, available at any hardware or hardware store. Before doing any concrete stair repair, the first thing to do is to thoroughly clean the area around the crack to make sure there is no dirt or debris. Also make sure that this area is completely dry. If moisture or water is trapped around the crack, the sealant will not adhere to the concrete and will peel off within a month. Now mix in a small amount of epoxy putty and use a flat spatula to apply it along the length of the crack. Level the surface so that the stairs are level. Allow the epoxy to dry for 4 to 6 hours before using the stairs.
Repair the Broken Stairs
If your stairs are broken on the steps, you need to fix them ASAP. Concrete stairs usually have chips near the edges of the stairs. Broken concrete stairs are a serious safety hazard, especially if you have children at home. To repair broken concrete steps, you will need wooden formwork about 4mm thick, duct tape, quick-setting cement and a trowel.
Procedure
Wash the damaged area first with water and allow the stairs to dry, vacuuming up all the dirt, gravel and sand so that the area is completely free of dirt. Now cut the L-shaped wooden shape that matches the dimension of the stairs. Hold the wooden shape against the broken corner of the staircase and secure it with strips of duct tape. Mix the quick-setting cement with water in a small plastic container and apply this cement to the wooden formwork and concrete stairs. You have to work quickly because the cement sets very quickly. Level the edge and corner of the stairs with a trowel. Allow the concrete to cure for a day, then carefully peel off the tape and remove the wooden formwork. Your concrete stair repair is complete.